- 35%


1,677.00 IVA esclusa

The Lombardi LVR1200BP is an innovative, high quality Line Array  sound system of acoustic loudspeakers, designed and built in Italy by the Lombardi Amplification with first choice components. The cabinet is made with three types of wood. The outside is made of Poplar plywood, that makes it very lightweight and with a warm sound. The fixing panel of the speakers is made of Fir, so that the harmonic board can have the best timbre. The support are made of Birch that gives them solidity.

The Lombardi LVR1200BP module has two coaxial 10″ speakers with a Kapton driver, perfect for small and big events Service or for the installation in Public Places and Theaters. Modular system made of up to 12 units in a line , perfect for any kind of service thanks to the extraordinary horizontal coverage of 90° and vertical coverage of 70° per module that makes it uniqueWhen are used several modules the Phase of the speaker is perfect thanks to the study of coaxial woofers that improve both the cover and the efficiency.

The product is user-friendly, light, modular, very efficient and has the high quality of Lombardi Amplification’s products.

SKU: DLVR1200BP Category: Product ID: 3101


The acoustic loudspeakers system is compact and has an high quality with good power per dimensions. The product is perfect as Line Array, as loudspeaker in single formation (WARNING: use the appropriate structures to hang it) or as stage monitor. 2 ways passive loudspeaker with bass reflex system that has two coaxial speakers with 10″ neodymium woofers, two metal horn compression driver, 1″ Kapton membrane and one passive filter net. It is an high quality and compact product with a good power for dimensions, that has to be piloted with two amplifiers, one that is at least 1200W RMS on 2 Ohm for low-medium frequencies and the other one that is at least 600W RMS on 4 Ohm for high frequencies.

Perfect in combination with the sub LS1000P, LS2500, LS5000P.


Bass reflex system 2 ways
Woofer 2 coaxial da 250mm 10″ with metal compression horn and 1″ kapton membrane
Tuning frequency 113 Hz
Crossover filter passive incorporated
Cut frequency 3100 Hz 12 dB/oct
Rated power 1800w RMS (1200W medium low freq., 600W high freq.)
Maximum power 2100w
Rated impedance 2 ohm medium/low frequencies, 4 ohm high frequencies
Connector Speak-on © 4c
Finish scratch proof spray coating
Dimensions cm [WxDxH]  66×46,5×38,5
Weight kg 29,7
Suitable for installation:
– Line Array for fixed installations or for installation on flying bar with Ball Lock fast assembly and dismantling
– Satellite or monitor
– Double front transport handle
– Support rubber feet
– Speakers protection metallic net

  • Amplification front stage/ side / drum files
  • Line Array
  • Audio/video cinema surround amplification system
  • Music for pub / club / squares / theaters of all sizes
  • Nightclub
  • Live music / playback / spoken




 Manual English


 blank  blank  blank
Certification Flying Bar and “C” Bracket with Ball Lock Certification Flying Bar and “C” Bracket with Front Bolt Drawings of components attached – Flying Bar and “C” Bracket


    • Flying Bar LVR1200BP cod: LVR (max n°12 LVR1200BP)


    • “C” anchor bracket LVR1200BP cod: ST-LVR1200 (max n°2 LVR1200BP stative – max n°3 LVR1200BP in line)blank


    • Ball lock to hang cod: BL-LVR1200blank


    • 2 Flight-Case for transport LVR1200BP and 2 Brackets ST-LVR1200 cod: FL-LVR1200blank


Additional information

Weight 35 kg
Dimensions 80 × 60 × 50 cm


There are no reviews yet.

Be the first to review “PASSIVE LINE ARRAY LVR1200BP 1200 W RMS”

Your email address will not be published. Required fields are marked *