- 30%

LM5ST MIXER AMPLIFIED ANALOG 5 STEREO CHANNELS

1,733.32 IVA esclusa

The LOMBARDI analog mixer mod. LM5ST AMPLIFIED, the latest addition to the Lombardi house, adopts quality and characteristics that make it suitable for all situations where versatility of use and audio definition are required.

The analog mixer has 5 independent channels.
The first 3 channels are Mono with control over 5 equalization bands with intervention frequencies centered to obtain maximum adjustment in the vocal band, allowing you to obtain maximum performance from any type of microphone, both condenser and dynamic.
The 4 and 5 channels are Stereo with control on 3 equalization bands with frequencies optimized for the best adjustment.

Category: Product ID: 5348

Description

Channels section
  • CHANNELS 1-2-3
    • mono channel with left / right balance
    • microphone / line input selector
    • Balanced XLR microphone input
    • Mono line input with unbalanced 6.3 jack
    • 5-step equalization (12K Hz, 5K5 Hz, 1K Hz, 250K Hz, 60 Hz)
    • 100Hz high pass filter with button and control led
    • button with independent + 48v (phantom) power supply LED for each channel to power condenser microphones and DI boxes
    • -20db attenuation selector that allows you to interface any equipment with any type of signal such as recorders, VCRs, cameras, radios, etc.
    • Rotary potentiometer for volume adjustment
    • Left and right balance rotary potentiometer
    • There are also 2 auxiliary sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Output 1 is PRE fader, overall mixer output 2 can be PRE or POST fader. Both have balanced outputs with XLR connectors
    • Light switch with led on / off
    • mono led indicator of peak and signal presence
  • CHANNEL 4
    • stereo channel with left / right balance
    • microphone / line input selector
    • Balanced XLR microphone input
    • Stereo line input with 2 jacks 6,3 unbalanced (if you want to use it in mono, connect to the first Jack at the top)
    • front stereo minijack input
    • line / mic selector – minijack 3.5
    • 3-cut equalization (12K Hz, 1K Hz, 60 Hz)
    • Mono led switch
    • button with independent + 48v (phantom) power supply LED for each channel to power condenser microphones and DI boxes
    • -20db attenuation selector that allows you to interface any equipment with any type of signal such as recorders, VCRs, cameras, radios, etc.
    • Rotary potentiometer for volume adjustment
    • buttons for assignment Auxiliary 1, Auxiliary 2, left, right
    • There are also 2 auxiliary sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Output 1 is PRE fader, overall mixer output 2 can be PRE or POST fader. Both have balanced outputs with XLR connectors
    • Light switch with led on / off
    • stereo led indicators for peak and signal presence
  • CHANNEL 5
    • stereo channel with left / right balance
    • microphone / line input selector
    • Balanced XLR microphone input
    • Stereo line input with 2 jacks 6,3 unbalanced (if you want to use it in mono, connect to the first Jack at the top)
    • Bluetooth input
    • line / mic selector – Bluetooth
    • 3-cut equalization (12K Hz, 1K Hz, 60 Hz)
    • Mono led switch
    • button with independent + 48v (phantom) power supply LED for each channel to power condenser microphones and DI boxes
    • -20db attenuation selector that allows you to interface any equipment with any type of signal such as recorders, VCRs, cameras, radios, etc.
    • Rotary potentiometer for volume adjustment
    • buttons for assignment Auxiliary 1, Auxiliary 2, left, right
    • There are also 2 auxiliary sends for connected effects (reverbs, delays, etc.) or monitors for secondary listening. Output 1 is PRE fader, overall mixer output 2 can be PRE or POST fader. Both have balanced outputs with XLR connectors
    • Light switch with led on / off
    • stereo led indicators for peak and signal presence
Master Section
    • ignition switch
    • VU Level 13 indicator Left / Right room Stereo LED (switchable to Auxiliary 1 and Auxiliary 2)
    • volume per recording output
    • Volumes Auxiliary 1 and Auxiliary 2
    • Auxiliary Pre / Post switch 2
    • Auxiliary / Master Level VU Indicator Switch
    • Left room and right room volumes
    • Mono / Stereo general mixer switch
Output section
  • Amplified output with 03 Speakon connectors that can be used in 3 configurations via switch:
    • configuration 1 in MONO:
      • ch. 1: Treble with high pass 145 Hz
      • ch. 2: Treble with high pass 145 Hz
      • ch. 3: Low pass sub 145 Hz
    • configurazione 2 in MONO:
      • ch. 1: Left
      • ch. 2: Left
      • ch. 3: Aux 2
    • configurazione 3 in STEREO:
      • ch. 1: Right
      • ch. 2: Left
      • ch. 3: / (nothing not working)
  • Balanced preamp outputs with XLR connectors
  • Subwoofer output cut 145 Hz 12 dB oct. Pass Low
  • Unbalanced recording output with RCA connectors and independent volume control
  • Auxiliary 1 and Auxiliary 2 XLR balanced outputs (monitors 1 and 2)
  • INSERT (6,3 stereo jack) to connect equalizers and limiters (ING – OUT SALE) in the Right and Left room
  • Ground / Ground selector
  • VDE power connector with spare fuse box and earth switch complete the mixer functions

Standard RACK size 3 units.
dimensions cm [WidthxProfxHeight] 48.5x39x13.2
weight kg 9,5

Applications:

High quality analog mixer that can be used in any musical situation

Documentation:
blank

Brochure

Additional information

Weight 14 kg
Dimensions 60 × 50 × 25 cm

Reviews

There are no reviews yet.

Be the first to review “LM5ST MIXER AMPLIFIED ANALOG 5 STEREO CHANNELS”

Your email address will not be published. Required fields are marked *