- 30%

BASS VALVE AMPLIFIER HEAD AND CABINET LB1 LOMBARDI 200 W

4,200.00 2,940.00 IVA esclusa

The Bass Amplifier Lombardi LB1 HEAD AND CABINETclass AB 200 W RMS, uses only vacuum tubes. The amplifier was designed and built in Italy by the Lombardi Amplification with high quality components. The amp is made of Poplar plywood, that makes it very lightweight.

The Bass Amplifier Lombardi LB1 HEAD AND CABINET derives from the historic bass amps LB1 built in the 70s by the
Lombardi enterprise. The old LB1 was used by some of the best musicians in the world…

There it is the Lombardi LB1 BASS HEAD AND CABINET …

Categories: , Product ID: 2993

Description

The Bass Amps has a hot and powerful sound, perfect for demanding musician.
The head is true to the original. It has 2 power and class channels and two chassis, independent pre-amplifier and amplifier, in order to have a clearer and dynamic sound.
2 channels with different keys, the first one has a modern and deeper tone, the second one has a modern, deep tone
Both channels have 0 and -10 dB inputs, volume controller and high and low pitch controller, that could be considered “not enough”, but it is more than enough to be ready for any kind of situation.
The cabinet, made of birch wood and powder coated, is a real bass instrument, has a biconic speaker, 18″ – 46 cm, designed with our technical specifications.
The LB1 head has two mode, 4 and 8 Ohm, that can be activated with a power switch. Therefore the head can be used as a class 1 or 2.

Technical Description:

2 channels bass amplifier

Low and high pitch volume controller and sensitivity in both channels

Class A-B valve pre-amplifier and amplifier

Output power supply 200 W

Tubes Amplifier:
– output: 4x 6550
– pilot: 3x ECC82

Tubes pre-amplifier:
– input: 2x ECC83
– output: 1x ECC82

  • 1 biconical speaker 18″

Power supply 230-110 V 50/60 Hz

Powder coated (black with white edges)

  • 2 handles

Support rubber feet

Loudspeaker protection

Dimensions cm [WxDxH] 59x29x32

Dimensions cm [WxDxH] 70x37x70

Weight head kg 30

Weight cabinet kg 32

 

Reboot of historic LB1 built in the 70s:

 

LB1 ’70s Vintage

 

Jimi Hendrix – Bologna

 

PFM with Lombardi

 

Additional information

Weight 85 kg
Dimensions 70 × 90 × 90 cm

Reviews

There are no reviews yet.

Be the first to review “BASS VALVE AMPLIFIER HEAD AND CABINET LB1 LOMBARDI 200 W”

Your email address will not be published. Required fields are marked *